Posts by Cutter Christian

Sprint/Nextel has decided to sever its Internet connection with Cogent, another Internet service provider, according to last night's statement from Cogent.

Internet health data indicates that Cogent and Sprint are no longer exchanging traffic.

As a result, it is no longer possible for many Sprint customers and Cogent customers to directly communicate across the Internet.

Some say it's a battle for bandwith, but others think it's much more...

Post it here and we'll be glad to answer any questions you may have!

For instance...  Have you ever wondered how f/stops really work?

Well check out this article for a bit of "enlightenment"!

by: Matthew Cole

Photographers set their exposure using a combination of shutter speeds and f/stops to get the correct amount of light on the film (or sensor--this all works for digital too). The shutter speed regulates how long the film is exposed to light coming through the lens. The f/stop regulates how much light is allowed through the lens by varying the area of the hole the light comes through. For any given film speed and lighting combination there is one correct amount of light to properly expose the film. This amount of light can be achieved with many different combinations of f/stops and shutter speeds. This page goes over the f/stop and especially its initially-confusing numbering at some length.

The f/stop is a source of confusion and mystery to many photographers, even to some who use it all the time. I find it interesting that in one local local camera shop they have pictures under glass on the counter showing a scene using a range of focal lengths (for a good example of this, see my friend Dave Dahms' Lens Focal Length Chart), a bunch of photos showing the same scene printed at different sizes and a set of photos showing an action scene shot at different shutter speeds. All that is assumed to be of interest and comprehension to the customers. What they don't have is a set of photos showing depth of field, or a scene shot at a range of exposure combinations where the f/stop's effects are shown. Maybe it just takes too much explanation. Well, too much explanation is what this page is all about.

Fill That Bucket!

My favorite analogy for exposure is filling a bucket of water. A bucket is of fixed size and needs a certain amount of water to fill it, just like film, which is of a set film speed and needs a certain amount of light to capture an image. To fill your bucket, you can pour a small stream of water for a long time or a fast stream of water for a short time. Either way, you end up with the same amount of water. In photography, the size of the stream of the water is analogous to the f/stop, the length of time you pour is analogous to the shutter speed, and the size of the bucket is analogous to the film speed. Broadly speaking, from the bucket's point of view, it doesn't matter which combination of stream size and length of time you choose as long as the right amount of water ends up coming in. Film is the same; within limits, it is indifferent to the combination of time and amount of light as long as the right amount of light eventually arrives.

Shutter Speeds

Shutter speeds are a bit easier to understand, so I'll start with those. Both exposure controls run through a sequence of settings which involve doubling and halving the amount of light reaching the film. Shutter speeds are measured in seconds and fractions of a second and so the doubling and halving is self-evident. One quarter second is half as long as one-half second but is twice as long as one-eighth. One second is twice as long as half a second and half as long as 2 seconds. It's pretty easy, and this works through the whole sequence of shutter speeds. On my Nikon FE, for instance, the shutter speed sequence is:
 

8 seconds    4 seconds    2 seconds    1 second    1/2 second   1/4   1/8   1/15   1/30   1/60   1/125    1/250   1/500   1/1000

Each of these settings is clearly half/double the length of time of its immediate neighbours (OK, I know, 1/15 isn't exactly half the time of 1/8th and 1/125th isn't half the time of 1/60th, but it's close). This doubling/halving is thus pretty simple to comprehend for this exposure setting.

F/Stops

f/stops are a bit more confusing because the numbers appear so arbitrary. This is the standard sequence of f/stops from f/1.4 to f/22. Although it doesn't seem intuitive at first, in this sequence the f/1.4 setting lets in the most light while the f/22 setting lets in the least. Also, each of these f/stops has precisely the same halving/doubling relationship as the shutter speed sequence.

1.4    2.0    2.8    4    5.6    8    11    16    22

On the face of it, going from f/4 to f/5.6 doesn't sound like halving the amount of light. What's more, 5.6 is a larger number and sounds like it ought to be more light, not less. Neither does f/4 to f/2.8 sound like doubling the amount of light. In fact, each of the numbers in this sequence is a halving/doubling of the amount of light from its immediate neighbours, just like the shutter speed settings are. Not only that, but it makes sense, as I shall show below.

The reason that both the halving and doubling and the smaller numbers mean more light things make sense is that the f/stop is a ratio. The ratio is between the diameter of the aperture in the lens and the focal length of the lens. The focal length is generally measured in millimeters, so we'll stick with those as our unit of measure. On a 50mm lens, f/2 is saying that the diameter of the aperture is 25mm. The ratio is this 50/25 = 2. A good question might be, what is the area of that aperture? Well, the aperture is usually a set of five to fifteen blades which form a roughly circular hole, so we'll use the formula for the area of a circle, which as you all remember from fifth grade math is π * radius². For π I'll use 3.14159265. On our 50mm lens, the aperture at f/2 has a diameter of 25mm which is a radius of 12.5mm. The area of the aperture is thus π X 12.5², or 3.14159265 X 156.25, or 490.9 square millimetres.

This fact by itself isn't all that useful. It is useful in relation to the adjacent f/stops. What is the area of the aperture at f/2.8? Well, because the f/stop is a ratio of the focal length to diameter, our 50mm lens at f/2.8 would have a diameter of 50/2.8 = 17.86mm. The area of the circle thus formed would be π X (17.86/2)², or 250.5 square mm. That's about 250 sq. mm at f/2.8 and 500 at f/2, a double/half relationship. Aha! So that's it! The area of the hole doubles and halves, it's just represented by a ratio on the lens! No wonder it's so darn confusing.

Here's a table of the aperture areas for the common f/stops for a 50mm lens:

If you look down the column of figures on the right, you can see the (more or less) doubling/halving going on up and down the column. You can see also how the big numbers make for smaller areas since the f/stop number is being divided into the focal length, then halved, then squared, then multiplied by π. It's no wonder this seems obscure.

Why not just call for the aperture area directly? A couple of reasons. First of all, if you have a 50mm lens on and say "I shot this with my 50mm at 1/125th and an aperture area of 63 square millimeters" you will impart correct and exact information that precisely zero people will understand. It's way easier to say "I shot this at 1/125th at f/5.6". Also, 63 square millimeters is f/5.6 only with a 50mm lens. If your lens is a 35mm, or an 85, or a 300, the ratio is changed around and the exposure is different. In fact, that 63 sq. mm is about f/4 on the 35mm, f/9.5 on the 85mm and f/32 on the 300. Knowing only the area of the aperture requires also knowing the length of the lens also to be informative as to the amount of light coming through the lens. The f/stop figure incorporates both of these in one useful if initially confusing measure and the lens length is immaterial. It's shorthand, in effect. When you say f/8, you mean for this focal length (the f?), give me an aperture whose area is such that diameter of the resulting circle goes eight times into my focal length. Fortunately, the lens makers figure out all these things for us and just mark the f/stops on the lens for us. They're doing us a big favor.

Got it. What about other f/stop terms?

When people talk about an fast lens, what does that mean?

Lenses are referred to by their maximum aperture (that's the biggest hole, the smaller number). Thus, Nikon made (at least) three 28mm lenses at one point, a 28 f/2.0, a 28 f/2.8 and a 28 f/3.5. All three of these lenses had f/4, f/5.6, and so on up to f/16; they were distinguished by the maximum amount of light they could let in. The 28mm f/3.5, one of which I own, when set to its maximum aperture of f/3.5, lets in one third less light that the 28 f/2.8. The 28 f/2.8, in turn, at its maximum aperture, lets in only half the light of the 28 f/2.0 at it's maximum aperture. Lenses which have wide maximum apertures and let in lots of light are called fast lenses. Lenses which let in comparatively less light at their maximum apertures are called slow lenses. The 28 f/2.0 would be a fast lens; the 28 f/2.8 would be sort of regular, for which there isn't really a name; the 28 f/3.5 would be kind of slow.

Why wouldn't you always use a fast lens?

Weight and expense. To get those larger diameter apertures means you need larger pieces of glass mounted in correspondingly larger lens barrels. They're harder to manufacture, the lens barrel keeps getting heavier to hold all that heavy glass in alignment so it all gets weighty in a hurry, and they're more challenging optical designs. There have been very fast lenses made which have the reputation of being really nice wide open but kind of doggy performers stopped down. If you normally do not use the fast lens at its widest settings, if you are mostly at, say, f/8, then you are carrying around a heavy and expensive optic which may be underperforming its cheaper brethren stopped down.

The size penalty is really obvious in the long lenses. The weight balloons and the cost skyrockets. For instance, I used to own a Nikon 300mm f/4.5 ED-IF lens. The IF is internal focus, the ED had to do with the Extra-low Dispersion glass used. It was a sweet lens, 300mm in length, with silky smooth focusing and weighed in at 2 lbs. 2.9 oz. (989g). If I stepped up to the 300 f/2.8 lens the weight went to 5 lbs. 8 oz (2500g). Not fast enough? How about Nikon's 300 f/2? It weighed in at 15 lbs. 6.9 oz. (7000g). The 300 f/2 picks up 2 1/3 stops over the 300 f/4.5 I owned, but it takes an eminently hand-holdable telephoto that fits in the camera bag and makes it into an unwieldy unit needing a tripod, requiring its own suitcase and weighing seven times as much.

Even on shorter lenses the difference is noticeable; my brother-in-law's Nikon 55 f/1.2 is much heavier than my 50 f/1.8. His viewfinder sure is bright and that last stop can be handy sometimes, but the camera weighs a lot on the neckstrap and you start to question its value if you're shooting at f/11 anyway. If you do decide you want the fastest possible lenses, go buy yourself a Leica M6 or M7, for which you can buy a 50mm f/1.0 lens and a 75mm f/1.4. And before you think that it's modern technology that allows these wonders, recall that Canon made a 50mm f/0.95 for their rangefinder cameras back in the 1950s.

I hear stops referred to a lot. Are these always f/stops?

No. A source of confusion is that "stops", as in f/stops, has become something of a handy shorthand for other doubling/halving relationships when referring to exposure. Thus, when someone says they "stopped down", they probably did change the aperture from, say, f/8 to f/11. However, if someone says they wish they had a stop more light, they mean they wish they had twice as much. If they say they got some ASA 400 film which is two stops faster than their Sensia II, it means it is four times as sensitive and you can infer that the Sensia was ASA 100 (from 400, 200 would be one stop, one halving, and 100 would be the second stop, the second halving). Even experienced photographers get confused sometimes; I had one guy tell me he "pulled his film 6 stops, from ASA 100 to ASA 6". Well, that's not six stops, it's four. Here, count along: 100 to 50 is one, 50 to 25 is two, 25 to 12 is three, 12 to 6 is four.

Note that stops always refer to exposure things. You would not say a 100mm lens is a "stop longer" than a 50mm because it was twice as long! You would say it was twice as long, or just that it's a 100mm.

What is stopping down?

I've had a number of emails asking about this. When you stop down a lens, you are going to a larger number/smaller aperture and therefore less light. Going from f/8 to f/11 is stopping down. The opposite is opening up; going from f/11 to f/8 is moving towards the smaller number/larger aperture and therefore more light.

What About my weird f/stops?

The f/stop sequence I listed is the full stops. Most things in photography work in 1/3 and 1/2 stop increments, and you will find lenses with maximum apertures at other-than-full f/stops. In fact, among the lenses I own or have owned, there are maximum apertures are f/2, f/2.8 and f/4, all right on the full stops, and others in between at f/1.8, f/2.5, f/3.2, f/3.5, f/3.8 and f/4.5.

You Say Most things Double and Halve?

Yep. Shutter speeds do the 1/15  1/30  1/60  1/125 thing referred to earlier. The f/stops we have referred to extensively in their f/2.8  f/4  f/5.6 etc. sequence. Film speeds do the same thing. The doubling goes like this in the common range of film speeds:

25   50   100   200   400   800

Each step here is a doubling/halving of the film's sensitivity to light. Thus, an ASA 100 film requires twice as much light to be correctly exposed as an ASA 200 film but only half as much as an ASA 50 film. You would say it was a stop slower than the 200, a stop faster than the 50.

There are third-stop intervals in ASAs as well. Here are the third stop increments of ASA with the full-stops in bold.

25  32  40  50  64  80  100  125  160  200  250  320  400

There are still films made at some of the intermediate speeds, like Kodachrome 64 slide film, Plus-X Pan Professional black and white at ASA 125, and Fuji NPS and some Kodak Portra color negative film at ASA 160.

How do you refer to exposures between full f/stops?

Generally, I just say f/5.6 and a third, or halfway between f/5.6 and f/8, or something. I have a Sekonic light meter that reads full f/stops plus a fraction in between expressed in tenths. If I took a reading that said 1/125th of a second at f/5.6 plus four of these ten segments, I could go through the machinations to figure out exactly what f/stop that is (f/6.25) but that's not all that handy, to tell you the truth. No lenses are incremented in tenths of stops and tenth-stops are a needless amount of precision anyway given all the sources of slop in photography. Half and third stops are about as fine a distinction as matters. I have had a number of inquiries about what the intermediate stops are. I finally did a Printable Sheet of Third-Stop Increments which you can look at if you are deeply interested.

I took my lens apart. The aperture is nowhere near as big as the calculation shows. What's up?

You're right. I had an email from a guy who had taken apart a Rokkor 300mm f/4.5 (for other reasons, not to check my measurements) and he said the diameter of the f/stop blades was way smaller than the calculation would indicate. The calculations above would be accurate if the aperture blades were mounted right in front of the front element. In fact, they're buried in the lens somewhere and, on the Nikkor 300mm f/4.5 IF-ED I used to own, were actually located behind all the lens elements. They still have the same relationship but the manufacturer can make the aperture blades way smaller in the light path partway back. However, the relationship is the same between each of the adjacent stops.

Why are they called f/stops?

I have no idea. I've never read an authoritative description of where the name came from. I have a vague memory that the defunct magazine Modern Photography did an article about it in about 1974 but my vague memory also seems to recall that it might have been the April issue. I have received a number of emails over the years with helpful but conflicting opinions on this and one day I'll compile them into a separate page.

My lens or camera has Image Stabilization and it's worth 2 stops. What does that mean?

To be clear, it does not mean that more light comes through the lens. What Image Stabilization (IS) does is move something around (a lens element or sometimes the digital sensor) to compensate for the natural unsteadiness of your body. Remember when I said "stops" can refer to more than just f/stops? This is one of those cases. What this means is that the IS will allow you to hold the camera steady at a slower shutter speed without body-motion-induced blur. If you could hold your 200 at 1/250th before but started blurring at 1/125th, you can now go down 2 stops (from 1/250 to 1/125 to 1/60) and still have an image as sharp as at 1/250th. Note this only accounts for blur induced by you--if you're trying to stop action, the amount of blur from subject movement will still be the same. Note that sometimes on digital cameras the IS is really only jacking up the ISO a couple of stops with all the implications that has for noise. Optical Image Stabilization means there is actually something moving, not just a sensor ISO change.

Is the f/stop all I need to know about the light transmission through the lens?

Probably. It's good enough for virtually all amateurs and nearly all professionals. There is a concept called t/stop, for transmission stop, which is a measure of the actual light transmission of the lens rather than the simple ratio of the aperture to the focal length. The t/stop can vary from the f/stop because you have a lot of lens elements (big zoom lenses might have these) or you have one lens coated and another not coated. About the only people who need this level of precision are professional cinemaphotographers who use the t/stop to set exposure. Their lenses sometimes have both f/stop and t/stop scales marked. Even when they know the t/stops of the lens, the f/stops remain important because depth of field is driven by the f/stop regardless of the light-passing ability of the glass. I have never seen a still photography lens marked in t/stops, but the concept is out there so I thought I'd mention it.

The only time I have found the marked f/stop to be undependable was with a Vivitar 600mm f/8 Series One lens I had. This was a catadioptric (mirror) lens billed as a Solid Cat because rather than mirrors and airspace, it had mirrors with solid glass in between. This puppy weighed a lot! Anyway, the lens was f/8 but my own experience was that if you used a separate meter you'd better think about it as an f/8 and a half or f/11 lens.

So What's Important in all this?

You need to know the doubling/halving relationship and how it works with shutter speeds in exposure. This is key since the shutter speeds and f/stops you choose have implications in how your final photograph will look in ways other than purely the amount of light on the film. You need to know that as you stop down you get more depth of field. You do not need to go around calculating aperture areas for your lenses and f/stops. If you're like me, it's worth doing it once to see that it works, then forgetting about.

How a Range of Settings Gives the Same Amount of Light

Now, to bring this all together, we know that the shutter speeds and f/stops both double and halve. Thus, we know that we can open up an f/stop (letting in twice the light) and move the shutter speed one step faster (cutting the time in half) and have the same amount of light on the film. For instance, if we meter a scene and it tells us that 1/125th at f/8 is the correct exposure, any of the following combinations would work:

Practically speaking, you aren't going to have one lens which takes you from f/1.4 to f/45 and your camera body may not have the higher shutter speeds. Also, if you are without a tripod, there are limits to how slow your shutter speed can be before your body movements blur the photo, so there are some constraints. But the point remains, all these combinations yield the same amount of light on the film and an identical picture in terms of brightness. What does vary is the ability of the camera to stop action and the depth of field, or how much is in focus in front of and behind the subject. This gives you some control over how your photographs will turn out. You should understand it and use it.